White's Smoke Jumper Standard Last

Please choose your primary leather. By default this leather will be on all parts of the boot.

This is the front center part of a shoe's toe and usually is sewn to the upper and heel counter. Any leather can be placed here.

A toe box is put in the toe of the boot to keep the shape - without a toe box, your boot will be soft and not keep its shape as much. All non-cowhide leathers require a toe box. Changes to the toe box don't visually change the boot.

A stiff piece of leather used to maintain a shoe's shape, and which is inserted between the shoe's lining and upper materials.

From heel to toe, this term refers to the all the parts of the shoe that cover the top of the foot. Many exotics aren't allowed on the upper as they aren't rigid enough.

The backstay is the portion of leather got runs vertical from the heel counter to the top of the boot.

You can choose what color you want your hardware to be. You can choose from Black Small AA, Brass, Antique or Nickel. Some leathers designated on the upper will disable Black Small AA as an option.

Choose either a leather or nylon lace. A lace is used to tighten or loosen your boot to fit your foot.

The bottom most layer of material of the boot that touches the ground. This can be made of leather, rubber or compostion.

The heel shape can be standard (curved also known as 'Cuban') or have a 90 degree block heel.

A "last" is the shape of the foot bed. #38 Swing has a roomier toe box, #461 creates a contoured toe for a "rock while you walk" step, "Bounty Hunter" is a lower profile toe that appears on the Semi-Dress.

The dye used around the perimeter of the boot to dye the leather. When a light colored sole is selected (Christy or 2021 sand) a natural edge is mandatory.

Choose the width of your foot. Please refer to the "Measurement Chart."